The Techno G-Code accepts industry standard G-Code programs and translates them into a form compatible with
the Techno series of electronics. The Techno G-code can be used to interface with a number of CAM programs.
Most CAM packages produce generic FANUC G-code format, which can be read by the Techno G-code. Pro
Manufacture®, Weber®, SurfCAM®, Anvil®, BobCAD®, CASmate®, SIGNLAB®, and ArtCAM® are all compatible
with this interface. The software features:
3 2-axis circular interpolation
3 Up to 4-axis linear interpolation
3 Incremental and absolute positioning
3 Canned drilling
3 M-Codes to turn outputs on and off
3 The servo version also features continuous
motion capability
3 Text editor to assist in writing programs
3 Jogging
3 DNC capabilities for running unlimited
length code such as from CAM programs
Technoisel
G-Code Interface
;SAMPLE1.NCD FOR TECHNO G-CODE INTERFACE
N030 G90
N040 M03
N050 G00 X0.75 Y1.0 Z0.2
N060 G01 Z-0.1 F5.0
N070 X0.25 F20.0
N080 G03 X0 Y0.75 I0 J-0.25
N090 G01 Y0.25
N100 G03 X0.25 Y0 I0.25 J0
N110 G01 X0.75
N120 G03 X1 Y0.25 I0 J0.25
N130 G01 Y0.75
N140 G03 X0.75 Y1 I-0.25 J0
N150 G00 Z0.2
N160 X0.677 Y0.823
N170 G01 Z-0.1 F5.0
N180 G03 X0.5 Y0.896 I-0.177 F20.0
N190 G03 X0.323 Y0.823 I0 J0.25
N200 G01 X0.177 Y0.677
N210 G03 X0.104 Y0.5 I0.177 J-0.177
N220 G03 X0.177 Y0.323 I0.25 J0
N230 G01 X0.323 Y0.177
N240 G03 X0.5 Y0.104 I0.177 J0.177
N250 G03 X0.677 Y0.177 I0 J0.25
N260 G01 X0.823 Y0.323
N270 G03 X0.896 Y0.5 I-0.177 J0.177
N280 G03 X0.823 Y0.677 I-0.25 J0
N290 G01 X0.677 Y0.823
N300 G00 Z0.2
N310 M05
N320 M30
SUMMARY OF COMMANDS
G-Code
Function
G0
G1
G2/G3
G4
G10
F
M3 M5
G81 G88
M91/M90
G90/G91
G92
Rapid motion
Linear cutting motion
Circular motion
Dwell
Home Axis
Feed rate
Spindle control
Canned drill cycles
Control outputs
Absolute/Incremental programming
Reset zero point
G - CODE COMPILER SOFTWARE
Catalog Number
Description
MAC 200/100 Series Version
Stepper DaVinci Version
Servo DaVinci Version
H22T59-GCODE-M
H22T59-GCODE-C
H22T59-GCODE-S