New Series of 5 Belt Driven Slides From
Techno-Isel Offer Advanced HTD Timing Belt Drives at Low Cost!
New Hyde Park, NY - A new series of 5 timing belt driven
slides from Techno-Isel feature speeds up to 5 meters per second and
many different motor and carriage configurations from stock. These
slides, identified as the Blue Line 1, Blue Line 3, ZF 1, ZF 2 and
ZF 3 Series slides offer exceptional value to end users and OEMs for
a wide variety of automation applications.
All slides use an HTD timing belt, have home position switches
accurate to less than 0.1 mm and repeatability of travel less than
0.2 mm. The Blue Line Series 1 is available in stock lengths to 2
meters. Maximum speed is 2.4 meters per second. The Blue Line Series
3 comes in stock lengths up to 3 meters and can handle speeds to 5
meters per second. The ZF 1 Series slide comes in stock lengths up
to 3 meters. Maximum speed is 1.5 meters. The ZF 1 is very narrow
(30 mm wide) and has a low profile (44 mm) and a 2:1 gear ratio is
available. The ZF 2 Series slide comes in stock lengths up to 3
meters. Maximum speed is 5 meters per second. The ZF 2 comes
standard with a 2:1 gear reduction for increased torque and inertia
matching. The ZF 3 Series slide comes in stock lengths up to 3
meters. Maximum speed is 5 meters per second.
Of special interest is the HTD timing belt drive used on all 5
series of slides which feature a deep curvilinear profile for more
positive non-slip operation when compared with the conventional
trapezoidal tooth profile.
This provides greater shear strength and smaller unit pressure per
tooth since the area of contact is greater.
Receive additional information about the Belt Driven Slides
online at:
www.technoautomation.com, or call to speak with an
Application Engineer at 1-516-328-3970.
Return to PR Newsroom