Home Page

Gantry System III

FEATURES

Moving gantry provides large stationary
  work surface

All axes provided with home reference
  switch   and far end limit switch with

  0.01  mm repeatability 

  Y axis is provided with aluminum dust
   cover and Teflon lip seals to provide
   protection against contaminants

X axis bearings and drive screw are
  mounted beneath the work surface to
  protect them from 
dust and debris

2 patented double linear rails and 4
  patented double  bearing blocks on each
  axis

Models 015, 027, 040, 054 & 067
  feature 125 oz.in  stepper motors,
  model HL2100M473030

Model 130 features 150 oz.in stepper
  motor, model HL2100M473040 on
  bottom axis

All models with servo motor option
  feature motor model H50R10-0242 with
  500 line, line driver optical rotary
  encoder

 
  

Standard anti-backlash ball screw and
   nut, 16 mm diameter with 5 mm pitch

Heavy cast aluminum side plates
   support the Y axis and provide
   increased stiffness for cutting and
   positioning applications

Standard clearance under the gantry is
   200 mm (optional gantry clearance
   heights of 300 mm and  500 mm
   available)

Work surface constructed of flat milled
   30 x 250mm aluminum table plates

Plastic guards not included 



 

    

EXAMPLE:    



To order an XY Gantry System with Stepper Motor (S), Ball
Screw (B), 200 mm Gantry Clearance (2) & 500 x 540 mm Travel (027), the Catalog Number is HL32SBM201202705.


Model

Table Size
mm (in)

Travel (X Y)
mm (in)

015
027
040
054
067
130

600 x 500 (23.6 x 19.6)
850 x 750 (33.4 x 29.5)
1100 x 750 (43.3 x 29.5)
1100 x 750 (53.1 x 29.5)
1350 x 1000 (53.1 x 39.3)
1750 x 1250 (68.8 x 49.2)
350 x 290 (13.7 x 11.4)
500 x 540 (19.6 x 21.2)
750 x 540 (29.5 x 21.2)
1000 x 540 (39.3 x 21.2)
850 x 790 (33.4 x 31.1)
1250 x 1040 (49.2 x 40.9)

                      
                       
  XYZ GANTRY SELECTION
An XYZ Gantry III consists of an XY Gantry III and a Z Axis  selected from page 48.

              
* Gantry clearance on Model 015 is 125 mm

46      Next Page