Cross Section Area:
Moment of Inertia Ix:
Moment of Inertia Iy:
Manufacturing Tolerance as per DIN 1748/4
100 kg load centered between supports 100 cm apart
10 kg load 100 cm from fixed end
This structural profile is made of clear anodized extruded aluminum.
Five T-slots are provided, one on each side, one on the top and two
on the bottom; These T-slots can be used to clamp parts in position
and will allow the profile to be joined together to make table surfaces
of any desired width. The T-slots are designed to use standard M6
nuts or the M6 Nut Strip described in our accessory section. Two
specially shaped channels are available at each end of the extrusion
to be used with M4 self-tapping screws or tapped with an M4 thread.
Table Plate 15x75 is intended to be used as a universal mounting
platform and is suitable for machine tables which use T-slots to hold
work pieces and to mount gauging and test fixtures.
In order to improve our products, we reserve the right to make engineering changes.
1 meter length
2 meters length
3 meters length
Available in any length, up to 3
meters. Please contact our sales
department for price and delivery
For OEM and quantity pricing,
contact our sales department.
Table Plates 15x75