116
www.techno-isel.com
TECHNICAL DATA
Cross Section Area:
1181 mm2
Weight/Meter:
3.19 kg/m
Moment of Inertia Ix:
3.29 cm4
Moment of Inertia Iy:
309.6 cm4
Max Twist:
0.5 mm/m
Flatness:
0.5 mm/m
Manufacturing Tolerance as per DIN 1748/4
Beam Deflection
100 kg load centered between supports 100 cm apart
Deflection X:
0.901 cm
Deflection Y:
0.010 cm
10 kg load 100 cm from fixed end
Deflection X:
1.441 cm
Deflection Y:
0.015 cm
This structural profile is made of clear anodized extruded aluminum.
Nine T-slots are provided, one on each side, three on top and four
on the bottom. These T-slots can be used to clamp parts in position
and will allow the profile to be joined together to make tables surfaces
of any desired width. The T-slots are designed to use standard M6
nuts or the M6 Nut Strip described in our accessary section. Four
specially shaped channels are available at each end of the extrusion
to be used with M4 self-tapping screws or tapped with M4 thread.
Table Plate 15x175 is intended to be used as a universal mounting
platform and is suitable for machine tables which use T-slots to hold
work pieces and to mount gauging and test fixtures.
In order to improve our products, we reserve the right to make engineering changes.
Structural Profiles
1 meter length
HL4720M1005-1000
2 meters length
HL4720M1005-2000
3 meters length
HL4720M1005-3000
Available in any length, up to 3
meters. Please contact our sales
department for price and delivery
information.
For OEM and quantity pricing,
contact our sales department.
Table Plates 15x175
50
100
10.5
6.5
5.25
3.5
175
50
50
