C A D C A M |
Features | Entry | Router | Router Pro |
| 3D Wireframe geometry creation and dimensioning | X | X | X | |
| Read/write translators (IGES, DXF, SAT, STL, Parasolid, and more) | X | X | X | |
| DWG, EPS, and raster to vector translators | X | X | ||
| Door geometry creator | X | X | ||
| Basic nesting | X | X | ||
| Surface creation | Optional | Optional | ||
| Solids creation | Optional | Optional | ||
| Advanced nesting | Optional | X | ||
| Fully associative toolpaths | X | X | X | |
| Drilling | X | X | X | |
| 2D contour cutting | X | X | X | |
| 3D contour cutting, trimming & remachining | X | X | ||
| Basic pocketing | X | X | X | |
| Advanced pocketing, including open pockets | X | X | ||
| Tabs | X | X | ||
| Toolpath editor | X | X | ||
| Automatic feed rate optimization | X | X | ||
| On-screen toolpath verification | X | X | ||
| Engraving | Optional | Optional | ||
| Multi-surface roughing | X | |||
| Multi-surface finishing | X | |||
| Multi-surface "cleanup" machining | X | |||
| 4- and 5-axis machining | X | |||
| 5-axis contour cutting, trimming & drilling | Optional | X |