Home Page
Product Finder
36 www.techno-isel.com Series 1 Double Rails* SERIES 1 DOUBLE RAIL (1)  The actual length is 4 mm less than the nominal length NOTE: STEEL SPACERS ARE NOT TO BE REMOVED FEATURES •  Two parallel, hardened and ground 12 mm diameter steel shafts, accuracy grade h6, hardened to RC 62 + 2 •  Parallelism and accurate center distances achieved by rails and ground spacers inserted into the extrusion at 50 mm centers •  Lightweight, high stiffness •  Hardened spacers RC 62 with 6.5 mm diameter hole to accommodate mounting screws •  3 carriage options with easy assembly and low friction •  Weight is 3 kg/m Nominal Catalog Number    Length (1) mm HL4222M0010300 300 HL4222M0010400 400 HL4222M0010500 500 HL4222M0010600 600 HL4222M0010850 850 HL4222M0011000 1000 HL4222M0011100 1100 Nominal Catalog Number   Length (1) mm HL4222M0011250 1250 HL4222M0011350 1350 HL4222M0011500 1500 HL4222M0011750 1750 HL4222M0012000 2000 HL4222M0012500 2500 HL4222M0013000 3000 * This isel Linear System is patented. 23 L 50 23 10.5 6.5 24