techquestions@techno-isel.com
51
Series 400 Compatible Carriages
Bearing Carriage 4*
FEATURES
• Single-piece body construction of ground and
hardened steel, where each Bearing Carriage
has 4 recirculating ball tracks
• The bearing also has a Ø28 mm H7 precision
hole through the body for mounting a ball
screw, ball nut, pneumatic cylinder, belt or
other drive mechanism
• Comes standard with wipers and 2 lubrication
ports
• Ø28 mm diameter hole designed to take 16 mm
KM Series Ball Nuts (see page 104), and there
are three M6 tapped mounting holes on top of
the carriage for mounting a carriage plate
• Compatible with the Series 2 Double Rail, Series
200 Double Rail, Series 400 Double Rail and
Series 500 Double Rail system
• Play-free design and large load capacity
* This isel Linear System is patented.
Maximum Load (N)
Fz Fy
Static
800
800
Dynamic 500
500
BEARING CARRIAGE 4: HL46D0M223007
Maximum Moment (N·m)
Mx
My Mz
Static
12.6 22 12.6
Dynamic
7.4 13
7.4
0.8
0.8
Ø28
+0.15
+0.10
12
3xM6
2xM8x0.75
60
5
