98 www.techno-isel.com FEATURES: * This isel Ball
Nut is Patented. KM Series Anti-Backlash Ball Nuts* (16 mm dia.) 3 Ball nut features patented
adjustable anti- backlash design when used with our mounting blocks. 3 Made
of steel, Cf 53, hardened, ground and polished. 3 Ball
nut is 50 mm long by 28 mm diameter. 3 2
optional mounting brackets allow for flange mounting or base mounting. Both
feature standard
lubrication ports and are made of steel with a black oxide finish. 3 Available
in 2.5, 5, 10 and 20 mm pitch. 3 Produce greater than 90%
efficiency in converting rotary to linear or linear to rotary
motion. 3 Repeatability
< 0.01 mm, accuracy < 0.1 mm/ 300 mm when used with our screws.
3 Optional wipers available. 3 Compatible
with 16 mm diameter ball screws only. 41.5 12.5 6.25 Ø27.4 50 Ø22
H7 Ø6 ±0.01 Ø28 50
28.4 11
Ø39 Ø40 g6
Ø39 90°48
Ø51 Ø6.6 4 PLACES
Ø62 Ø6
Ø7.9 6.25
16.6 20.75
Ø28 H7 Ø28
H7 6 5.5
47 35
R 5 12.5 25 50 3326.5 2 x M8 x 0.75 43.75 23
Fig. 1 Fig. 2 Fig. 3 Fig. 1 Fig. 3 Fig. 2 2.5 mm HL5232M213503 5 mm HL5234M213505 10 mm HL5235M213510 20 mm HL5236M213520 Pitch Catalog Number (fig. 1) Catalog Numbers FLANGE MOUNTING BLOCK (fig. 2) HL5200M213501 BASE MOUNTING BLOCK (fig. 3)
HL5200M213500 WIPER SET (2 pieces) not shown
HL5200M613502 Mounting Blocks
