134
www.techno-isel.com
Assembly Hardware
T-SLOT NUTS FOR M6 SCREWS
OVAL, 3 mm thick
Single M6 Thread (Pack of 20)
HL6100M209001 (Fig. 1)
Double M6 Thread, 25 mm apart
HL6100M209002 (Fig. 2)
(Pack of 50)
SQUARE, 2 mm thick
Single M6 Thread (Each)
HL6100M1120 (Fig. 3)
Double M6 Thread, 25 mm apart
HL6100M1122 (Fig. 4)
(Each)
NUT STRIP, 1 meter long, M6 tapped holes on 50 mm centers,
4 mm thick
HL6100M209011 (Fig. 5)
T-SLOT NUTS FOR HEAVY-DUTY TABLE PLATES
T-NUT, DIN 508, Single M6 thread - Sold per package of 10
HL6100M209119 (Fig. 1)
OVAL, Single M6 Thread, 6 mm thick - Sold per package of 50
HL6100M209004 (Fig. 2)
M6 -SCREWS – Zinc plated, each item sold per piece
SOCKET HEAD CAP SCREW
M6 X 10
HL6100M1116
M6 X 12
HL6100M1117
M6 X 16
HL6100M1113
M6 X 22
HL6100M1111
M6 X 30
HL6100M1112
SOCKET HEAD SET SCREW
M6 X 6
HL6100M1115
T-SLOT NUTS FOR M3 SCREWS – For use with Enclosure
Corner Extrusions (sold in pack of 100)
T-SLOT NUT, Single M3 thread
HL6100M499530
NUT STRIP, 430 mm long tapped M3 on 0.2 inch centers
HL6100M138049
M3 SCREWS – Zinc plated
PHILLIPS HEAD MACHINE SCREWS
M3 x 6
HL6100M499030 (sold in pack of 100)
M3 x 10
HL6100M1130 (each)
SELF -TAPPING SCREW
M3 x 10
HX6100M0310 (each)
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 1)
(Fig. 2)
