Electronics - Stepper
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

C-Series IT116G Single-Axis Controller

This controller is for light- to medium-duty applications. Note that since the motors will be powered with 3.5A peak current, the load and force specifications should be correspondingly reduced.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

C-Series C10 Machine Controller Eurocard DIN Packaged System

This controller is suitable for light- to moderate-duty cycle applications such as in laboratories or schools. It is suitable for driving slides up to 300 mm travel. Note that since the motors will be powered at 2A peak current, the load and force specifications should be correspondingly reduced.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

C-Series C116 Machine Controller

This controller is suitable for normal-duty applications. It is suitable for driving slides and gantries up to 500 mm in travel length with Z-axis loads of 25 lb. maximum. Note that since the motors will be powered with 3.3 A/phase, they will produce only 80% of their rated torque. 
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

C-Series C142 Machine Controller Eurocard DIN Packaged Systems

This system is recommended for full production systems on any machine in our catalog. It is suitable for continuous duty production systems.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

C-Series Controller Card 4.0 & 4.0 I/O

Euro-card with microprocessor handles one to three axes stepper motor drives.  Can be programmed with simple ASCII commands. Commands can be executed as a program or in "immediate" mode.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

C-Series Stepper Motor Drivers

This series of Stepper Motor Drivers is to be used with our C Series of Machine Controllers. Each driver is designed to be used with a particular C Series Machine Controller.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

PCMAC100A Stepper Card

The PCMAC is a stepper motor control board and logic control system designed to be inserted into one 8 bit, full length slot on an IBM PC or compatible computer.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

Centurion Single-Axis Stepper Controller

The Centurion is a self-contained single-axis stepper-motor and I/O control system. The Centurion is a complete system, ready to operate with any of the SD series of stepper motor drivers.
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

Stepper Motor Assemblies

 
Stepper Motor Assemblies, Controllers, C Series,Single Axis, Eurocard DIN Package,Machine, Drivers, PCMAC Cards, Centurion

Stepper Motor Drivers

 

 
Note:
Prices and specifications are subject to change without notice. Every effort has been made to provide accurate technical and product information. The company disclaims responsibility for any error or omission in the accuracy of the technical and product information published.

Techno, Inc.
Click here to send Website related comments to Techno Linear Motion Systems
E-Mail: TECHNO-ISEL LINEAR MOTION SYSTEMS
 Phone: 516-328-3970  Fax: 800-737-7436 or 516-326-8827