Sub-header

LEZ1G Belt Actuator

  • LEZ1G Belt Actuator
Click image to enlarge
LEZ1G Belt Actuator for moderately priced, for moderate loads. The drive belt is protected by aluminum cover. 
  • Runs on LFS-8-1 low profile rails for a compact cross section
  • Play free positioning with 15mm wide timing belt drive
  • Speeds up to 2.4m/sec
  • Repeatability of ± 0.2 mm
  • Limit switches at both ends of travel
  • Switch repeatability < 0.1mm
  • Lengths up to 2.05 m with travel up to 1743mm
  • Drive shaft extends out on both sides
    • motor can thus be mounted on either side
    • H frame drive can easily be made with optional transmission bar
Configure Your Part
Select Options then Click “Add to Quote”
Part Number:
Quantity
Add To Quote
Features
  • Speeds up to 2.4 meters/second with appropriate motor and driver
  • Repeatability: ±0.2mm (±.008in.)
  • Standard lengths up to 2 meters
  • Limit Switches at both ends of travel are included
  • 15mm wide reinforced HTD belt
  • CAD drawings available for download
  • Complete Electronics Package Available to Complete your Application
  • Lead is 48mm
 
LEZ 1G Blue Line
Shaft slide WS 1
C0  4590 N
C  2390 N
F1 static  3920 N
F1 dynamic  2041 N
F2 static  4590 N
F2 dynamic  2390 N
Mx static  55.0 Nm
My static  148.1 Nm
Mz static  173.4 Nm
Mx dynamic  28.6 Nm
My dynamic  77.1 Nm
Mz dynamic  90.2 Nm

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us