Sub-header

Work Holding Components

  • Isel Toggle Clamp
  • Isel Low Profile Cam Clamp
  • Isel Heavy Duty Cam Clamp
  • Isel Clamp Bar
  • Isel Pneumatic Vise
  • Isel Manual Vise
Click image to enlarge
A variety of clamps and vises and clamp bars are available to hold work pieces to the surface of Isel Automation Gantry, slides and table plates.  
Isel Toggle Clamp ADJUSTABLE TOGGLE CLAMP
Made of steel, the Adjustable Toggle Clamp is ideal for holding odd shaped parts. The front screw can be positioned along the T slot while the rear screw adjusts the pressure on the part. Both M6 screws and an M6 T-Slot nut are included with the clamp. Sold as a set of 2, PN 290051
Isel Low Profile Cam Clamp LOW PROFILE CAM LOCK CLAMP
This cam clamp is designed for lighter low profile materials such as engraving plastic sheets. The T slot mounting hardware is included. PN 290001
Isel Heavy Duty Cam Clamp HEAVY-DUTY CAM LOCK CLAMP
Made of black oxidized hardened steel, this clamp will provide up to 2500 N of clamping force with 100 N (22.5 lbf) of actuating force. A rotation of the locking arm will provide a clamp stroke of 4 mm (.15 in). 15 mm (.6 in) high, 32 mm (1.3 in) wide, 107 mm (4.2 in) overall length. Provided with two-hole nut strip and screws to allow mounting to a T-Slot.
PN 290002
Isel Clamp Bars CLAMP BARS
Made of plated steel, these Clamp Bars are 10 mm (.39 in) high and 20 mm (.8 in) wide. Available in 3 lengths of 125, 175 and 250 mm. To be used with either the cam lock clamps or the pneumatic clamps to make a work holder. Provided with screws and nuts to allow mounting to a T-Slot. 2 clamp bars per set
PN: 125mm clamp bars 290021 0125
       175mm clamp bars 290021 0175
       225mm clamp bars 290021 0225
Isel Pneumatic Clamp PNEUMATIC CLAMP
Made of hardened steel with a black oxide finish, the Pneumatic Clamp is provided with screws and nuts for mounting to the T-Slots and a fitting for 6 mm (.23 in) OD, 4 mm (.15 in) ID plastic pressure tube. PN 290010
Isel Manual Vise MANUAL VISES
These Manual Vises are made of steel with side slots for flexible mounting. The moveable jaws have side guides and the stationary jaws have both horizontal and vertical V-slots for holding round objects. Both jaws have support surfaces for holding flat objects. Available in SMALL or LARGE size.
SMALL: 152L x 130W x 45H (6 x 5.1 x 1.8), PN 290055
LARGE: 215L x 175W x 75H (8.5 x 6.9 x 3), PN 290056
Configure Your Part
Select Options then Click “Add to Quote”
Part Number:
Quantity
Add To Quote
 

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us