Series 400 Double Rail
|
|
Series 400 Double Rail |
Features
|
• The Series 400 Double Rail is the Series
200 Double Rail (described on page 16) in an enclosed aluminum housing. • The profile is completely sealed (except for the ends) with a one piece aluminum housing. • The carriage extends out of the enclosure through Teflon coated rubber seals. • Available in a variety of standard lengths • Maximum recommended speed is 5 m/sec. • Ideal for custom drive applications with screws,belts, pneumatic cylinders, etc.
|
• Can be used
with Bearing Carriage 2
shown on page 16 or Bearing Carriage 4 shown on page 20. • Straight to within 1 mm / 3m at 20oC. |
||
|
|
|
|
Bearing Carriage 4 |
FEATURES
|
• Single piece body construction of ground
and hardened steel. • Each Bearing Carriage has 4 recirculating ball tracks. • Play-free design. • Large load capacity. • Comes with standard wipers and 2 lubrication ports. • There are three M6 tapped mounting holes on top of the carriage. • The bearing also has a Ø28 mm H7 precision hole through the body for mounting a ball Screw, ball nut, pneumatic cylinder, belt or other drive mechanism. *This isel Linear System is Patented |
• Compatible with the
Series 2 Double Rail,
Series 200 Double Rail, Series 400 Double Rail and Series 500 Double Rail systems. |
|
|
20 Next Page
