Series 500 Double Rail *
|
|
Series 500 Double Rail * |
Features
|
• The Series 500
Double Rail system offers
all the features of the Series 200 and Series 400 double rails. • The Series 500 also features two sets of double rails in a completely enclosed one piece aluminum extrusion housing. • The optional bearing carriages extend out of the housing, through Teflon coated rubber seals. • Available in a variety of lengths. • Maximum recommended speed is 5 m/sec. • With 4 bearings and a mounting plate, this system has extremely high load and torsion capacity. |
• ldeal for custom drive applications with
screws belts, pneumatic cylinders, etc. • Can be used to construct two parallel and Independent drives. • Large central core can be used to house and protect motors, Wiring and pneumatic lines in harsh environments. • This double rail Is compatible with Bearing Carriage 2 and Bearing Carriage 4. • Straight to within 1 mm/3 m at 2OoC |
|
|
|
|
Bearing Carriage 4 |
FEATURES
|
• Single piece body construction of ground
and hardened steel. • Each Bearing Carriage has 4 recirculating ball tracks. • Comes with standard wipers and 2 lubrication ports. • There are 3 M6 tapped mounting holes on top of the carriage. • Play-Free design. • Large Load capacity. • This Isel Linear System is patented. |
• The bearing
also has a Ø28 mm H7
precision hole through the body for mounting a ball screw, ball nut, pneumatic cylinder, belt or other drive mechanism • Compatible with the Series 2 Double Rail, Series 200 Double Rail, Series 400 Double Rail and Series 500 Double Rail systems. |
|
|
22 Next Page
