Home Page

Narrow Profile Slide 2 

New Bearings / Heavy Loads

FEATURES

  • Constructed from a single rigid aluminum extrusion profile with aluminum end plates

  • Compact, modular design with T-slotted extrusions for easy mounting

  • Available with 150 oz.in stepper motor or 120W servo motor

  • Fitted with teflon seals to guard against contaminants

  • Home reference and far end limit switch with a repeatability of ± 0.01 mm

  • Two precision steel rails ø12h6 with either one or two single piece steel bearing blocks hardened to HRC 62 ± 2

  • Anti-backlash ø16 mm ball screw drives with pitches  of 2.5, 5, 10 and 20 mm available

  • Linear carriage is capable of speed up to 5 m/sec.

  • Optional magnetic brake, 330W servo motor, 306 oz.in stepper motor

P62_01.jpg (11322 bytes)

HEAVY DUTY SLIDE SELECTION

EXAMPLE:To order a Narrow Profile Slide 2 with Servo Motor (V), 10 mm Ball Screw (B), 1 screw  
and 2 carriages (3), and 390 mm travel, the
Catalog Number is    HL31VBMA3039010.
 

Code

Length
mm (in)

TRAVEL
MM(IN) 		Code

Length
mm (in)

Travel*
mm (in)

0390
0490
0590
0690
0790
0890
0990
1090

0390(15.4)
0490(19.3)
0590(23.2)
0690(27.2)
0790(31.1)
0890(35.0)
0990(39.0)
1090(42.9)

122(4.8)
222(8.7)
322(12.7)
422(16.6)
522(20.6)
622(24.5)
722(28.4)
822(32.4)

1190
1290
1390
1490
1790
1990
2490
2990

1190 (46.9)
1290 (50.8)
1390 (54.7)
1490 (58.7)
1790 (70.5)
1990 (78.3)
2490 (98.0)
2990 (117.7) 		922 (36.3)
1022 (40.2)
1122 (44.2)
1222 (48.1)
1522 (59.9)
1722 (68.0)
2222 (87.5)
2722 (107.2)

* Travel spec is based on a slide with 2 bearings. For a slide with only one
bearings, add 130 mm (5.1 in) to the travel. Dimension L is unchanged.

62   Next Page      Prev Page