Gantry System FB2

H834 Catalog Page
Techno Linear Motion Catalog www.techno-isel.com Techno_Inc. 62 Gantry System FB2 Model 015 027 040 054 067 130 Motor Drive X No Motor V Servo Motor 200 W S Stepper Motor C Crank Handle L Servo Motor 100 W For mating connectors and cables, see page ???. For machine stands, see page ???. For motor standoffs and couplings, see page ???. An XYZ Gantry SystemFB2 consists of an XY Gantry and a Z-Axis selected from page ??. Table Size mm (in) Travel (X – Y) mm (in) Model 600 x 500 (23.6 x 19.7) 850 x 750 (33.5 x 29.5) 1100 x 750 (43.3 x 29.5) 1350 x 750 (53.1 x 29.5) 1350 x 1000 (53.1 x 39.3) 1750 x 1250 (68.9 x 49.2) 350 x 290 (13.8 x 11.4) 500 x 530 (19.7 x 20.9) 750 x 530 (29.5 x 20.9) 1000 x 530 (39.4 x 20.9) 850 x 780 (33.5 x 30.7) 1250 x 1030 (49.2 x 40.6) EXAMPLE: To order an XY Gantry System with Stepper Motor (S), 190 mm Gantry Clearance (1) & 500 x 530 mm Travel (027), the Catalog Number is HL32SBM203202705. HL3200 05 Gantry Clearance 2 190 mm ( 7.5 in) 3 300 mm (11.8 in) 5 500 mm (19.7 in) XY GANTRY SELECTION CATALOG NUMBER 015 027 040 054 067 130 FEATURES: Replaces Gantry System III Moving gantry provides large stationary work surface All axes provided with home reference switch and far end limit switch with ±0.01 mm (±.0004 in) repeatability Y-Axis is provided with aluminum dust cover and plastic lip seals to provide protection against contaminants X-Axis bearings and drive screw are mounted beneath the work surface to protect them from dust and debris 2 patented double linear rails and 4 patented double bearing blocks on each axis Models 027, 040, 054 & 067 feature 125 oz in stepper motors, model HL2600M210001 Model 130 features 150 oz in stepper motor, model HZ2600M210002 All models with 200W servo motor option feature motor model HZ2600M1050XY3 with line driver optical rotary encoder, 1000 line Standard antibacklash ball screw and nut, 16 mm diameter with 5 mm pitch Heavy cast aluminum side plates support the Y-Axis and provide increased stiffness for cutting and positioning applications Standard clearance under the gantry is 190 mm (7.5 in) (optional gantry clearance heights of 300 mm (11.8 in) and 500 mm (19.7 in) available) Work surface constructed of flat milled 30 x 250 mm (1.2 x 9.8 in) aluminum table plates Plastic guards not included BM203 Home Page