|
|
Factory & Manufacturing Automation
| Design
Problem in Linear Motion: |
| Is It Possible to Automate
My Application AND Stay Under Budget? |
| How
to Solve This Problem: |
| Yes! Start with a Ready-Made
Standard Duty Slide from Techno-isel! |
Ready, Set, Automate...
The
Standard Duty Slide is a featured item among Techno-Isel’s
Linear Motion group. It comes in standard stock travel lengths
of 75 mm to 1275 mm and is available in 2.5, 5, 10 and 20 mm
screw pitches. The rolling contact of the ball screw and
anti-backlash nut give this slide great precision and high
efficiency. The two steel linear ground rails have four
precision bearing blocks with recirculating ball bearings.
Wait, we’re not done yet! Add to the list (but not the
price) an integrated aluminum housing WITH rubber seals; limit
switches on either end; a stepper or servo motor and a 220x175
mm table plate. Now, consider that you get all this: RIGHT OUT
OF THE BOX. An all inclusive slide, assembled, wired, mounted
and tested. Essentially, you get all the features and none of
the cost. For example, you can get a 75 mm travel Standard
Duty Slide with four bearing blocks and a Stepper motor for
only: $995.
No ‘Way’ Covers on this Slide…
Other slides that have accordion-like way covers can
reduce travel by as much as 15%! Techno’s Standard Duty
Slide comes equipped with an aluminum housing with rubber
seals that protect the slide and allow for greater travel
length in a smaller package. The integrated rubber seals keep
out the undesirables: dirt, dust and debris. The limit
switches are mounted inside the protective aluminum housing,
keeping them from being damaged as well.
Psst! We Got What Ya Need…
Techno-Isel slides offer the highest quality product
at the lowest price. We can offer all our slides with a
stepper motor, brush servo motor or a standard NEMA 23 motor
mount for your own motors! If the Standard Duty Slide doesn’t
suit your application needs, try the Narrow Profile Slide (NP2)
or one of our Heavy Duty Slides (HD2). The NP2 and
HD2 slides have the Standard Duty Slide’s similar features
at the same reasonable prices. |
|
|
|
|
