AccessoriesPhone: 516-328-3970www.technocnc.com47High-Frequency Spindle Pressure Foot . This pressure foot is designed to apply downward force to the part while being machined. This downward force prevents parts from popping up or shifting during machining. In conjunction, the debris that is removed while cutting is extracted through the built-in dust shroud. Downward force is manually adjusted by relocating the shaft collar along precision shafting.The pressure foot is ideal for plastics, woods, composites, fi berglass, or any substrate when routed. The pressure foot fi ts any manual high-frequency collet type spindles. This accessory can be added at any time.Technos Engraving Head Adaption toHigh-Frequency SpindlesFEATURESSpring-loadedengraving headwhich allows theengraving head toride on irregularsurfaces maintainingconstant cutter depthMicrometer tool depthadjustmentEasily and quicklyretracts allowinghigh-frequencyspindle to routeSpindle automatic tooling offsets forX, Y and Z positionsOn/Off functions controlled via CNCCollet SpindlesTechnos Multispindle OptionFEATURESIncreasedproductionfor greater partproductionvolumeEasily adjustablespindle center tocenter locationsvia T-Slot plateOn/Off functions controlled via CNCPressure Foot / Vacuum Shroud AttachmentFEATURESQuick and easy setupAdjustable downward forceBuilt-in vacuum shroudFits a variety of high-frequency spindlesEasily added to existing machineswith Colombo spindlesPrevents part movement