82Phone: 516-328-3970www.technocnc.comRouting ToolsSoft PlasticsSingle EdgeSolid CarbideStraight O FluteSingle EdgeSolid CarbideDowncut Spiral O FluteHelix Angle 22°*This tool is designed and toleranced for air routers with guide bushings.CatalogNumberCuttingEdgeDia.CuttingEdgeLengthShankDia.OverallLengthH25XAM-435001/81/21/42H25XOS-61-0455/81/83H25XOS-61-0431/44H25XOS-61-0643/163/162-1/2H25XAM-435041/42H25XOS-61-0811/43/82-1/2H25XAM-435083/4H25XOS-61-084*1-1/44H25XOS-61-1213/85/83/82-1/2H25XAM-431561H25XAM-435201/21/23For Use On:Soft Plastic: ABS, Polycarbonate,Polyethylene, PVC, Polypropylene,HDPE, Polystyrene, UHMW, andExtruded AcrylicDesigned to combine the fast free cuttingof O flute geometry with the tool life available from solid carbide particularlyin small diameters.For Use On:Soft Plastic: ABS, Polycarbonate, Polyethylene,PVC, Polypropylene, HDPE, Polystyrene, UHMW, andExtruded AcrylicSolid SurfaceThe polished flute allows for razor sharpcutting edge and easy chip evacuation.The down cut spiral helps improve part holding. CatalogNumberCuttingEdgeDia.CuttingEdgeLengthShankDia.OverallLengthH25XOS-64-0001/161/41/82H25XOS-64-0121/81/21/4H25XOS-64-0163/163/83/16H25XOS-64-0185/81/4H25XOS-64-0241/43/8H25XOS-64-0253/4H25XOS-64-0261-1/43H25XOS-64-0313/83/43/8H25XOS-64-0331-1/8Helix Angle 21°