Routing ToolsPhone: 516-328-3970www.technocnc.com91Specialty ToolsPlastic Drills withSpecial PointFor Use On:Soft Plastic: ABS, Polycarbonate,Polyethylene, PVC, Polypropylene,HDPE, Polystyrene, UHMW,and Extruded AcrylicHard Plastic: Cast Acrylic,Melamine, Nylon, PVC and VinylSpecial tool steel, surface-treated body,fl ute and point for maximum lubrication.Point is precision ground at 60° angle forgradual penetration to minimize cracking and chippingof plastic materials. 0° rake angle on the cutting edgeeliminates grabbing as the drill comes through the plasticsurface.*Shank length 7/8H25XOS-70-502H25XOS-70-503H25XOS-70-506H25XOS-70-509H25XOS-70-510H25XOS-70-511H25XOS-70-512H25XOS-70-513H25XOS-70-514*H25XOS-70-515H25XOS-70-516H25XOS-70-517H25XOS-70-520*H25XOS-70-521H25XOS-70-522H25XOS-70-523H25XOS-70-524*H25XOS-70-525H25XOS-70-526H25XOS-70-527H25XOS-70-528*H25XOS-70-529H25XOS-70-530H25XOS-70-5311/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641-1/21-3/41-15/161-3/42-1/82-7/162-1/22-5/82-7/162-7/82-15/163-1/161-3/43-5/163-7/163-1/22-1/43-3/43-7/83-15/162-1/24-3/164-5/164-3/8CatalogNumberShankDia.OverallLengthCuttingEdgeDia.CuttingEdgeLength1/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/642-3/42-7/83-1/83-1/43-1/23-5/83-3/43-7/844-1/84-1/44-3/83-1/84-5/84-3/44-7/84-3/85-1/85-1/85-3/84-3/45-5/85-3/45-7/8H25XOS-70-532*H25XOS-70-533H25XOS-70-534H25XOS-70-535H25XOS-70-536H25XOS-70-537H25XOS-70-538H25XOS-70-539H25XOS-70-540H25XOS-70-541H25XOS-70-542H25XOS-70-543H25XOS-70-544H25XOS-70-545H25XOS-70-546H25XOS-70-547H25XOS-70-548H25XOS-70-549H25XOS-70-550H25XOS-70-551H25XOS-70-552H25XOS-70-553H25XOS-70-554 H25XOS-70-555H25XOS-70-556H25XOS-70-557H25XOS-70-558H25XOS-70-559H25XOS-70-560H25XOS-70-561H25XOS-70-562H25XOS-70-5631/233/6417/3235/649/1637/6419/3239/645/841/6421/3243/6411/1645/6423/3247/643/449/6425/3251/6413/1653/6427/3255/647/857/6429/3259/6415/1661/6431/3263/642-5/83-1/83-1/83-1/83-1/8CatalogNumberShankDia.OverallLengthCuttingEdgeDia.CuttingEdgeLength1/21/21/21/21/25-1/86666Fractional Drills