techquestions@techno-isel.com
127
Enclosure Corners
ENCLOSURE CORNER 16 x 16
This structural profile is made of clear anodized extruded aluminum.
Two slots are provided to insert 1.5 mm thick aluminum sheet stock.
Specially shaped channels are available at each end of the extrusion.
These channels are designed to be used with M5 self-tapping screws
or tapped with an M5 thread. This profile is used to construct
enclosures for mechanical or electrical components.
ENCLOSURE CORNER 16 x 18
This structural profile is made of clear anodized extruded aluminum.
A slot is provided to inset 1.5 mm thick aluminum sheet stock. A T-nut
slot is provided to allow a 1.5 mm thick aluminum sheet to be screwed
to this profile. The T-slot is designed to accept a standard M3 nut or
the M3 nut strip described in the accessory section. Specially shaped
channels are available at each end of the extrusion to be used with
M5 self-tapping screws or tapped with an M5 thread. This profile is
used to construct enclosures for mechanical or electrical components.
In order to improve our products, we reserve the right to make engineering changes.
Enclosure Profiles 16 x 18
1 meter length
HL4712M3020-1000
2 meters length
HL4712M3020-2000
3 meters length
HL4712M3020-3000
Hardware
M3 T-slot nut
HL6100M1200
M3 x 4 screw
HL6100M49030-04
For OEM and quantity pricing,
contact our sales department.
Enclosure Profiles 16 x 16
1 meter length
HL4712M3010-1000
2 meters length
HL4712M3010-2000
3 meters length
HL4712M3010-3000
Hardware
Consists of 10 pieces each.
Corner clamp, M3 Square nut
& M3 x 10 screw
HL6100M129011
For OEM and quality pricing,
contact our sales department.
16
5.2
For M5
Self-Tapping Screw
or M5 Thread
16
5.2