Home Page
Product Finder
techquestions@techno-isel.com 131 Assembly Accessories CORNER BRACKETS: Designed to support two extrusions at right angles to each other. Catalog Number Structural Profile Length   Height   Width HL6100M209114 25 25 15 HL6100M209115 40 40 22 HL6100M209116 50 50 15 HL6100M209117 80 80 22 NOTE: Brackets are provided with screws and T-nuts to allow connection to T-slot. Catalog Number To be used as … HL6100M209103 Corner Connector with 3 sides HL6100M209104 Corner Connector with 2 sides MATERIAL: High-Strength Reinforced Plastic Sold in packages of 10 pieces NOTE: Brackets are provided with screws and T-nuts to allow connection to T-slot. CORNER CONNECTORS This bracket, 25 mm square, is designed to connect the ends of the 25 x 25 Structural Profile. Two versions are offered, one to connect two extrusions together and another to connect three extrusions together. CONNECTORS These connectors are used at the ends of the 25 x 25 mm Structural Profile and require an M6 threaded hole on the extrusion end. Catalog Number To be used as… HL6100M209106 Connect 3 extrusions at right angles to each in a single plane HL6100M209108 Connect 4 extrusions at right angles to each in a single plane HL6100M209107 Connect 4 extrusions at right angles to each in two planes HL6100M209109 Connect 5 extrusions at right angles to each in two planes MATERIAL: High-Strength Reinforced Plastic Sold in packages of 10 pieces NOTE: Brackets are provided with screws and T-nuts to allow connection to T-slot. MATERIAL: Cast Aluminum SCREW INSERT CONNECTORS These sets are used to join the 25 x 25 and 25 x 50 mm to the 50 X 50 mm profiles. Sold in sets of 10. Includes: set screw, barrel and    bolt. Catalog Number HL6100M209147110 Catalog Number HL6100M209147101 90° Sold in sets of two