Home Page
Product Finder
138 www.techno-isel.com Work Holding Components ADJUSTABLE TOGGLE CLAMP, made of steel, is ideal for holding odd shaped parts. The front screw can be positioned along the slot while the rear screw adjusts the pressure on the part. Both M6 screws and an M6 T-slot nut are included with the clamp. Catalog Number HL5400M290051 A HEAVY-DUTY CAM LOCK CLAMP, made of black oxidized hardened steel. This clamp will provide up to 2500 N of clamping force with 100 N of actuating force. A 180 degree rotation of the locking arm will provide a clamp stroke of 4 mm. 15 mm high, 32 mm wide, 107 mm overall length. Provided with two-hole nut strip and screws to allow mounting to a T-slot. Catalog Number HL5400M290002 CLAMP BARS, made of plated steel, 10 mm high and 20 mm wide in lengths to 175 mm. To be used with either the cam lock clamps or the pneumatic clamps to make a work holder. Provided with screws and nuts to allow mounting to a T-slot. Catalog Number Length (mm) HL5400M290020125 125 HL5400M290020175 175 PNEUMATIC CLAMP, made of hardened steel, with a black oxide finish, provided with screws and nuts for mounting to the T-slots and a fitting for 6 mm O.D., 4 mm I.D. plastic pressure tube. Clamping Dimensions Catalog Number Force   Maximum at min. length (N at 6 bar) Stroke (mm) HL5400M290010 50 10 20H x 65W x 75L MANUAL VISES are made of steel with side slots for flexible mounting. The movable jaws have side guides and the stationary jaws have both horizontal and vertical V slots for holding round objects. Both jaws have support surfaces for holding flat objects. Overall Catalog Number Maximum Dimensions Stroke (mm) HL5400M290055 65 152H x 130W x 45L HL5400M290056 95 215H x 175W x 75L (Sold in set of 2)