Home Page
H834 Catalog Page
Techno Linear Motion Catalog 172 G-Code Compiler SUMMARY OF COMMANDS G - CODE COMPILER SOFTWARE A complete G-CODE machining center consists of: •   G-Code Compiler software package •   An IBM/AT or compatible computer •   Any Series III, 3-axes Gantry or equivalent X, XY or XYZ system •   Techno Controller The Techno G-Code Compiler accepts industry standard G-Code programs and translates them into a form compatible with the Techno series of electronics.  The software features: The software package includes: 3  A built-in text editor to assist in writing programs 3  Compiler with built-in debugger 3  Jogging 3  DNC capabilities for running unlimited length code, such as from CAM programs 3 2-axis circular interpolation 3 Up to 8-axis linear interpolation 3 Incremental and absolute positioning 3 Canned cycles 3 Peck drilling 3 M-Codes to turn outputs on and off 3 Input sensing and decision making with branching 3 Looping 3 The servo version also features continuous motion capability G-Code Function G0 G1 G2 G3 G4 G10 G46 G90 G91 G92 G99 Rapid traverse Linear interpolation (feed function) Circular interpolation, clockwise Circular interpolation, counterclockwise Dwell Home Axis Backlash compensation Absolute programming Incremental programming Preset zero point Set acceleration / deceleration M02/M2 =N_/_ M91/M90 IFBIT N=S,L Program End Loop Command, Repetitive Programming Output ON / Output OFF Conditional Branching Function Miscellaneous Catalog Number Description MAC Controller Version "C" Controller Version Servo Version H22T59-GCODE-M H22T59-GCODE-C H22T59-GCODE-S