|
|
|
|
Techno CNC
Routers Design for Educational Competitions
|
Has your school used a Techno CNC Router to make
a winning design for an educational competition?
Share your successes (first, second, third
place) right here!
If you would like to submit your contest success
choose one of the options below:
1) Complete EDUCATIONAL
GALLERY UPLOAD
and upload all information
instantly OR..
2) Download CONTEST
GALLERY RELEASE and fax it back to us
at: (516) 358-2576.
|
|
 |
Congratulations to Jeff Lintz and
his class at Hialeah Middle School for
taking FIRST and SECOND place at
the Dade County TSA CO2 Competition
they used a
Techno Servo DaVinci
to achieve their
successful win!
Read an article
published in TECHDIRECTIONS on this teacher and
his students -
click here |
 |
Congratulations to Bloomsburg High
School (PA) Team for winning the Best
Overall and Fastest Car in the international
finals of the Jaguar F1 Team In School
CAD/CAM Design Challenge. The team
"Turbo" consisted of Alex DeRose, Austin
Mantz,
Tyler Marshall, Jessica Rubenstein and Justin
Wilcott with Team Advisor Kirk Marshall. "Turbo"
used a
Gantry III CNC Router System
for this
winning project.
To see additional pictures -
click here
|
|
|
Congratulations to Mr. Richard
Stebbins and his students (left to right)
Joseph Kyek, Zack Stebbins, John Saltarelli
on winning 1st place in the CT Skills
USA competition in Automated
Manufacturing Technology. The team will
represent CT in the national competition.
Good luck! |
|
Congratulations to (left - right) Mike
Daniels, CAD; Nate McGovern, Machine
Tech.; Joe Berard, Machine Tech. and
their teacher, Thomas Matuszak (not in
picture) for winning the Massachusetts State
Gold Medal in Automated Manufacturing
Technology for McCann Technical High
School, in North Adams, Massachusetts.
See National Competition Picture -
click here
|
|
Congratulations to (left - right)
Justin Burdick, CAD; Nate Pikula,
Machine Tech.; Collin Murdock, Machine
Tech. and their teacher from McCann Technical
High School in North Adams, Massachusetts. They
won the Massachusetts State Gold Medal in
Automated Manufacturing Technology 2007
using a
Techno Servo DaVinci. We wish them Luck in
the National Competition!
|
|
The table to the
left, is a MIDI Musical Instrument Digital
Interface Desk that teacher, Mark McCollough
created for his daughter as a Christmas gift
(2008).
He used
MasterCAM to design the desks' 3D toolpath, and
then used a Techno LC Series Model 4896 to
machine the wood parts. Mr. McCollough also used
a Haas to manufacture all the desks' assembly
fixtures.
View Additional Pictures
|
|
|
|
|
